{"title":"All","description":null,"products":[{"product_id":"replacement-solid-blade-clamps","title":"Replacement Solid Blade Clamps","description":"\u003cp class=\"text\"\u003e\u003cspan class=\"strong KCred\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e\u003c\/span\u003e This replacement set of solid blade clamps is for newer (post 2010) Mk.III saws only. \u003cspan class=\"strong\"\u003eThey will NOT fit older (pre-2010) Mk.III saws, Mk.IV heavy duty saws, Titanium (birdcage) saws, or Coping saws.\u003c\/span\u003e\n\n\n\u003c\/p\u003e\u003ch5 style=\"margin-bottom: 6px;\"\u003eReplacement Instructions\u003c\/h5\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eUse a 5\/64\" allen wrench to loosen the set screws in the clamp at the handle end of the saw and remove clamp.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eReplace with the new clamp, re-tighten the set screws. Note the location of the brass knob on the screw for front\/upper old clamp.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUnscrew the brass knob from the old upper\/front clamp, and remove it.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUnscrew brass knob from new clamp, thread it back through the hole in the axle (if you have a lever saw) and replace the brass knob on the end of the screw.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eAdjust until you can tension a blade properly. Start by putting the new knob in roughly the same position as the old one. Stop if you see any screw sticking out of the back of the brass knob, that’s too tight.\u003c\/li\u003e\n\u003c\/ul\u003e\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024319237,"sku":"125.840","price":32.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/replacement-solid-blade-clamps.jpg?v=1712936607"},{"product_id":"replacement-swivel-blade-clamps","title":"Replacement Swivel Blade Clamps for Mk. III Saws","description":"\u003cp class=\"text\"\u003e\u003cspan class=\"strong KCred\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e\u003c\/span\u003e This replacement set of swivel blade clamps is for newer (post 2010) Mk.III saws only. \u003cspan class=\"strong\"\u003eThey will NOT fit older (pre-2010) Mk.III saws, Mk.IV heavy duty saws, or Coping saws.\u003c\/span\u003e If you have a birdcage titanium saw, these are the swivels you need.\n\n\n\u003c\/p\u003e\u003ch5 style=\"margin-bottom: 20px;\"\u003eReplacement Instructions\u003c\/h5\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eUse a 5\/64\" allen wrench to loosen the set screws in the clamp at the handle end of the saw and remove clamp.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eReplace with the new clamp, re-tighten the set screws. Note the location of the brass knob on the screw for front\/upper old clamp.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUnscrew the brass knob from the old upper\/front clamp, and remove it.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUnscrew brass knob from new clamp, thread it back through the hole in the axle (if you have a lever saw) and replace the brass knob on the end of the screw.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eAdjust until you can tension a blade properly. Start by putting the new knob in roughly the same position as the old one. Stop if you see any screw sticking out of the back of the brass knob, that’s too tight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024330309,"sku":"125.850","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Replacement-Swivel-Blade-Clamps-for-Mk.III-Saws.jpg?v=1712941982"},{"product_id":"brass-tension-knob","title":"Replacement Brass Tension Knob","description":"\u003cp class=\"text\"\u003eBrass tension knob to replace any tension knob on any Knew Concepts saw. It’ll fit them all, even the ones that were black plastic to start with. Manufactured to be a little “stiff” on the screw, deliberately. So they don’t shift when the tension lever moves. One end is tighter than the other. The end with the ring around the screw hole is the tight end. Start screwing them onto the tension screw with the end with the ring facing away from the screw.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eIf you have a saw without a lever, the knob will stretch out as you screw it on the first time. The first time will be very stiff. After that, it’ll be fine. Or you could run an 8-32 tap through it once, to open out the ’tight’ section.\u003c\/p\u003e\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024358085,"sku":"125.860","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/brass-tension-knob.jpg?v=1712880671"},{"product_id":"3-birdcage-titanium-fret-saw-with-lever-tension","title":"3\" Titanium Birdcage Fret Saw with Lever Tension and Swivel Blade Clamps","description":"\u003cp class=\"text\"\u003e\u003cstrong\u003eDue to current events, we can no longer import the titanium sheet we need to make these saws.  They are--for the moment--out of production.  As soon as we can get more titanium, we will resume production.  Unfortunately we have no idea when that might happen.  Some of the distributors do still have stock however.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe strongest, most rigid Fret Saw available on the market today! It’s spine is a welded titanium beam, the blade is tensioned with a Lever that can tension blades so tight they “ping” with notes never heard before, makes turns that are tighter than ever before, and the blade clamps lock at 45° left, 0°, 45° right.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 171.5 grams.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024495941,"sku":"125.003T","price":215.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/3-inch-MkIV-Titanium.jpg?v=1713280895"},{"product_id":"5-birdcage-titanium-fret-saw-with-lever-tension","title":"5\" Titanium Birdcage Fret Saw with Lever Tension \u0003and Swivel Blade Clamps","description":"\u003cp class=\"text\"\u003e\u003cstrong\u003eDue to current events, we can no longer import the titanium sheet we need to make these saws.  They are--for the moment--out of production.  As soon as we can get more titanium, we will resume production.  Unfortunately we have no idea when that might happen.  Some of the distributors do still have stock however.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe strongest, most rigid Fret Saw available on the market today! It’s spine is a welded titanium beam, the blade is tensioned with a Lever that can tension blades so tight they “ping” with notes never heard before, makes turns that are tighter than ever before, and the blade clamps lock at 45° left, 0°, 45° right.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 187.5 grams.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024501445,"sku":"125.005T","price":235.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/5-inch-MkIV-Titanium.jpg?v=1713280634"},{"product_id":"8-birdcage-titanium-fret-saw-with-lever-tension","title":"8\" Titanium Birdcage Fret Saw with Lever Tension and Swivel Blade Clamps","description":"\u003cp class=\"black\"\u003e\u003cstrong\u003eDue to current events, we can no longer import the titanium sheet we need to make these saws.  They are--for the moment--out of production.  As soon as we can get more titanium, we will resume production.  Unfortunately we have no idea when that might happen.  Some of the distributors do still have stock however.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"black\"\u003eThe strongest, most rigid Fret Saw available on the market today! It’s spine is a welded titanium beam, the blade is tensioned with a Lever that can tension blades so tight they “ping” with notes never heard before, makes turns that are tighter than ever before, and the blade clamps lock at 45° left, 0°, 45° right.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 218.3 grams.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024562437,"sku":"125.008T","price":245.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/8-inch-MkIV-Titanium.jpg?v=1713280397"},{"product_id":"6-coping-saw-with-lever-tension-and-360-rotation-indexing-blade-hooks","title":"6½\" Coping Saw with Lever Tension and 360° Rotation Indexing Blade-Hooks","description":"\u003cp class=\"text\"\u003eThe blade is tensioned by a cam-lever and pulls so taut that the blade “sings” when plucked. \u003ca href=\"http:\/\/www.popularwoodworking.com\/woodworking-blogs\/chris-schwarz-blog\/a-real-contender-the-knew-concepts-coping-saw\" class=\"text\" target=\"blank\" title=\"Chris Schwarz Blog\"\u003eChris Schwarz (Popular Woodworking)\u003c\/a\u003e said “...it's more like sawing with an unbendable wire than a floppy steel hotdog (which is what is typical of most saws)”. Make turns that are tighter than ever before.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/-vxmZtOwSGc?si=DP4gLN69Rggyn5kE\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003eThe solid steel indexing blade-hooks lock in eight 45° positions for a full 360° rotation. The hooks are spring loaded to prevent inadvertent rotation. Each hook assembly must be squeezed together to index. When released, the internal spring locks them in position again. \u003c\/p\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eMachined from 3\/16\" thick 6061-T6 aluminum\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 9 ounces\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eAccepts standard 6.5\" pinned coping saw blades\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e6-1\/2\" deep throat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NYhY3hkpsl4?si=B2dRhOBUe3szxSiZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/KC-Coping-Saw-Instructions-v1.2-Web.pdf?v=1712433035\" title=\"Download Instructions\" target=\"blank\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download instructions for the Knew Concepts Coping Saw\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp class=\"KCred strong\" style=\"margin-bottom: .6em\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e Got Saw Blades?\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eIf you need saw blades, be sure to purchase them by the dozen for your specific craft before you checkout. Our Coping saws come with one \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/pegas-skip-tooth-blades\" title=\"Pegas #7 skip tooth woodworking blade\"\u003ePegas #7 skip tooth woodworking blade\u003c\/a\u003e already installed and ready to use.\u003c\/p\u003e\n\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024576773,"sku":"125.012","price":170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Coping-saw-Mk3X.jpg?v=1712526967"},{"product_id":"precision-power-saw","title":"Precision Power Saw","description":"\u003ch5\u003eNot just another electric powered saw...\u003c\/h5\u003e\n\u003cp class=\"text\" style=\"margin-bottom: 6px;\"\u003eList of features that distinguish it from all others:\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003ePure vertical motion of the saw blade. Easily makes cuts that scroll saws can’t.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eFail-safe. If the blade breaks, it instantly stops! The cable-drive cannot function unless the blade is complete. (you cannot push a rope).\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e2-1\/2\" stroke. Uses standard jewelers blades 8\/0 to 8 (5-1\/8\" long). Adjustable stroke for thicker material.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eHold down foot. Adjustable for material thickness. Reduces blade breakage, as part cannot lift.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eCarbide buttresses for blade. The blade is supported above and below the metal being cut. This prevents “bowing” of the blade, increasing blade life.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eToggle link tensioning blade. Finger adjustable knurled nut at upper rear of frame.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eBlade tilts 45° each way. Table stays stable.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eVariable speed. Uses a Foredom CC series* foot control (not supplied). Speeds: ZERO to 160 STROKES PER MINUTE. The slower speeds allow the blade to dissipate heat, increasing life.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eClamps to bench with two hand-knobs. Easily removable when finished.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e8\" deep throat.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"rounded_border\"\u003e\n\u003cp class=\"text\"\u003e\u003cspan class=\"KCred\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e\u003c\/span\u003e Requires a Foredom C.FCT-1 foot pedal or similar controls with standard 3 prong plug connection. Will not work with Foredom TX, LX or old R type foot controls. We’ve had good luck with the Lucas “Lo-Boy” pedals from Lucas Dental. They have great low end control that helps to get the most out of the power saw.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eWe also use the Foredom C.EM-1 tabletop control here in the shop when we test them before shipping. The table top controls are a different way of working, but very handy. The tabletop units might almost be our favorite way of controlling the saw.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/ncsinstructions.pdf?v=1712596118\" title=\"Download Instructions\" class=\"hyperlink\" target=\"blank\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Power Saw Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cp class=\"text\"\u003eThese are build to order. COVID caused supply trouble with the motors, but we can buy them one-at-a-time as needed. Please contact us directly for the most current information about availability.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024640517,"sku":"125.000","price":2400.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/KC-Powersaw.jpg?v=1713213405"},{"product_id":"titanium-soldering-clamps","title":"Titanium Soldering Strips","description":"\u003cp class=\"text\"\u003eInspired by British Master Goldsmith James Miller, these titanium strips can be easily bent into a wide range of specialized custom clamps for jeweler’s hard soldering operations.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/JMTM3KW_lns?si=9wDlfYUQohBmt3Y_\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/KC-Ti-Soldering-Clamp-Instructions-Mk1-web.pdf?v=1712680456\" title=\"Titanium Soldering Clamps instructions\" target=\"blank\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download how to bend and shape clamp instructions.\u003c\/a\u003e\u003c\/p\u003e\n  \n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003eTitanium has several advantages over traditional steel clamps when it comes to soldering. Solder doesn’t stick to it. Enamel doesn’t stick either. It stays strong when red hot. It doesn’t erode and flake away at heat, so your clamp tips can be smaller. Most importantly, titanium doesn’t transfer heat nearly as quickly as steel clamps, so it interferes with nearby joints less than steel clamps do.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eThese clamps are sold in a pack of 10 “blanks” as straight 4\" strips, to allow you to bend your own ideal clamp designs. Each soldering situation is different, and while there are a few basic designs that we illustrate in the \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/KC-Ti-Soldering-Clamp-Instructions-Mk1-web.pdf?v=1712680456\" title=\"Titanium Soldering Clamps instructions\" target=\"_blank\" class=\"hyperlink\"\u003ehow to bend and shape clamp instructions,\u003c\/a\u003e every jeweler is different, and each solders in their own unique way, and will need clamps customized for their own personal style, or unique need. The titanium strips are fully annealed, and can be bent and filed to suit in minutes.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eTo date, we’ve found several uses for them:\u003c\/p\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eholding ear wires during soldering\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eholding bails and jump rings\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ere-setting sweat soldered panels that had warped during the first soldering\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eclamping several items together during soldering\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003esoldering hemispheres into a full sphere\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eholding spheres onto ring shanks\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ethe list will go on...\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/HNd-af-Afv0?si=hCBV67LZnC-sUFsW\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" style=\"margin-top:20px;\" src=\"https:\/\/www.youtube.com\/embed\/GReEu8Zqtzk?si=DVbvOXlwOwvBo7JF\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024661573,"sku":"500.130","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Titanium-Strips.jpg?v=1712680163"},{"product_id":"pegas-18tpi-coping-saw-blades","title":"Coping Saw Blades: Pegas 18TPI Saw Blades","description":"\u003cp class=\"text\"\u003eThe coping saw comes with one 18TPI coping saw blade. Made in Switzerland, these are simply the best blade available. The teeth are machine filed, rather than punched, resulting in a sharper edge.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003e6.5\" long\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e.094 wide\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e.020 thick.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eSold in packs of 12\u003c\/li\u003e  \n\u003c\/ul\u003e\n\n\u003cp class=\"KCred text\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e These blades are for coping saws only, they will not fit fret saws.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024670789,"sku":"220.018","price":5.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Pegas-18TPI-Coping-Saw-Blades..jpg?v=1712780679"},{"product_id":"pegas-18tpi-skip-tooth-coping-saw-blades","title":"Coping Saw Blades: Pegas 18TPI Skip Tooth Saw Blades","description":"\u003cp class=\"text\"\u003eThese are simply the best blade available. These are the 18TPI \u003ci\u003e\u003cstrong\u003eskip tooth\u003c\/strong\u003e\u003c\/i\u003e coping saw blades that Chris Schwarz fell in love with.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eMade in Switzerland. The teeth are machine filed, rather than punched, resulting in a sharper edge. A very aggressive blade that clears the waste faster. Skip tooth blades have super wide gullets that help clear sawdust out of cuts in thick material or harder woods.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003e6.5\" long\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e.094 wide\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e.020 thick.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eSold in packs of 12\u003c\/li\u003e  \n\u003c\/ul\u003e\n\u003cp class=\"KCred text\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e These blades are for coping saws only, they will not fit fret saws.\u003c\/p\u003e\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024674565,"sku":"220.018-SK","price":5.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/18TPI-Skip-Tooth-Coping-Saw-Blades.jpg?v=1712780986"},{"product_id":"dovetail-accessory-plate","title":"Dovetail Accessory Plate","description":"\u003cp class=\"text\"\u003eOur American made Dovetail Accessory Plate is an aluminum plate that goes in-between your current dovetail and dovetail system tools. It gives you a selection of anchor points for more accessories such as face shields, magnets, LED lights, and more. You can fit your accessories into any of the holes, and they’ll work with your dovetail system parts, such as the line of GRS benchmate tools.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" style=\"margin-top: 20px;\" src=\"https:\/\/www.youtube.com\/embed\/s3yTsDA3pmg?si=q5VCla0kmYuBiCuw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\n\u003cp class=\"text strong\" style=\"margin-top: 20px;\"\u003eWhat’s included?\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Accessory Plate comes with a high-stength magnet for holding burrs and other small tools. It also comes with a Dovetail Mounting Plate and clips.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024910853,"sku":"350.200","price":120.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Dovetail-Accessory-Plate_bf1875a8-fcaa-4588-a5c5-7eea5c33d6e3.jpg?v=1713398655"},{"product_id":"tilting-dovetail-adapter","title":"Tilting Dovetail Adapter","description":"\u003cp class=\"text\"\u003eOur American made Tilting Dovetail Adapter system goes in-between your dovetail tools and the anchor point. It allows you to tilt any dovetail system tool up to 45 degrees to either side.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" style=\"margin-top: 20px;\" src=\"https:\/\/www.youtube.com\/embed\/s3yTsDA3pmg?si=q5VCla0kmYuBiCuw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text strong\" style=\"margin-top: 20px;\"\u003eThe primary uses for the Tilting Dovetail Adapter\u003c\/p\u003e\n\u003cp class=\"text\"\u003eIt allows you to tilt your bench pin to the side so that you can either file more comfortably or look past the frame of your saw when sawing under a microscope.\u003c\/p\u003e\n\n\u003cp class=\"text strong\"\u003eAnother use is for hand cutting blanking dies\u003c\/p\u003e\n\u003cp class=\"text\"\u003eBlanking dies are best cut with a guided sawframe like our Precision Saw Guide, but for small quantities of dies for limited numbers of parts, hand cut dies can provide satisfactory service.\u003c\/p\u003e\n\n\u003cp class=\"text strong\"\u003eAdjustable tilt angle\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Tilting Adapter comes with a setting knob to quickly adjust the tilt angle to 6 preset angles appropriate to a variety of die and blade combinations. Without using the presetting knob, it will adjust to any angle up to 45 degrees either way.\u003c\/p\u003e\n\n\u003cp class=\"text strong\"\u003eTilts any dovetail system tool\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe advantage to it for either use is that you can use any dovetail system bench pin, such as our Stainless Steel Bench Pin or any of GRS’ wooden or aluminum bench pins. The Tilting Adapter will allow you to tilt any GRS dovetail system tool, for any reason you like.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Tilting-Dovetail-Adapter-instructions.pdf?v=1712867644\" title=\"Download Instructions\" target=\"blank\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Tilting Dovetail Adapter Instructions\u003c\/a\u003e\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024923909,"sku":"350.230","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Tilting-Dovetail-Adapter_b67c99dd-c540-409b-a9e8-13a7cebff0c5.jpg?v=1713398598"},{"product_id":"accessory-plate-standoff-block","title":"Accessory Plate Standoff Block","description":"\u003cp class=\"text\"\u003eFor jeweler’s who have a European style jeweler’s work bench with deep half-moon cutouts, this standoff block will move the Accessory Plate an extra ⅝\" out from the bench face. This allows the clamp holes on the edges to be used, and the sides of the Accessory Plate will clear your deeply curved bench.\u003c\/p\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eComes with two mounting screws.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024957253,"sku":"350.205","price":22.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Accessory-Plate-Standoff-Block_9d5105eb-06ce-4503-8345-ccce5f2374fb.jpg?v=1713398467"},{"product_id":"dovetail-mounting-plate","title":"Dovetail Mounting Plate","description":"\u003cp class=\"text\"\u003eA standard, American made, versatile slide and lock dovetail mounting plate—made in the USA, used for adding another location for your dovetail mount accessories, or a permanent location for your Precision Sawguide or Bench Pin.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/s3yTsDA3pmg?si=FMAnNggwNdqogHPz\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"text strong\" style=\"margin-top: 20px;\"\u003eSpecifications:\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eThe dovetail plate is 2\" tall, by about 3.25\" wide (at widest)\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eThe holes are 0.200\" in diameter, and are countersunk for #10 screws\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eThe holes are 1 inch apart (on center) vertically, and 2.5 apart (on center) horizontally\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\"\u003eIt’s a handy way to store your benchmate or other dovetail system accessories. Just put several of them in a handy spot, and rack all your tools ready at hand and out of the way.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26024979205,"sku":"350.110","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Dovetail-Mounting-Plate_fa304092-fa7f-4d60-9016-dab697f08d68.jpg?v=1713398408"},{"product_id":"bench-pin","title":"Bench Pin","description":"\u003cp class=\"text\"\u003eMade in the USA of 3\/16\" solid stainless steel, it will not bounce or shimmy as you cut, yet is thin enough not to interfere with your stroke. The pin is designed to fit onto a standard dovetail mount, or onto one of our ‘clamp anywhere’ dovetail mounted clamps, so you can take them anywhere you like.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" style=\"margin-top: 20px;\" src=\"https:\/\/www.youtube.com\/embed\/jhDn4JJ-Lrc?si=DarpVjtlP3ddJ7_n\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text strong\" style=\"margin-top: 20px;\"\u003eDesigned from the beginning with the bench jeweler in mind, the pin has these extra “goodies” built in:\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eOn the front, there is an adjustable delrin ring hook specifically set up to make cutting rings for sizing a breeze. It can be either right or left handed, and adjusted to any angle you find comfortable.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eThe pin is solid stainless steel, rather than aluminum, so there is no risk of contaminating your sweeps or files with aluminum.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eIt comes with a brass guide fence to give you a reference for angles in 15 degree increments from 0 to 60 degrees. Very handy for trimming ring stock for sizing, or filing against the side of the pin to get angles nailed.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eAlso comes with a set of vertical pins that can be screwed through two of the holes in the plate, to serve as a guide for a #30 handpiece in drilling perfectly perpendicular holes, quickly. It will help hold your flex shaft handpiece square to the face of the pin. What you do with it from there is limited only by your imagination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ciframe width=\"100%\" height=\"315\" style=\"margin-top: 20px;\" src=\"https:\/\/www.youtube.com\/embed\/s3yTsDA3pmg?si=q5VCla0kmYuBiCuw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26025000965,"sku":"325.100","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Bench-Pin_09ddbbb8-889d-4886-a85c-e7b2f3b03ae8.jpg?v=1713398371"},{"product_id":"mini-clamp","title":"Mini Bench Clamp","description":"\u003cp class=\"text\"\u003eOur American made Mini Bench Clamp is a “baby brother” to our larger Bench Clamps, and operates in a similar fashion. It comes apart, and can be screwed back together in a range of lengths. Machined from solid aluminum for maximum strength, it can grab anything from ¾\" up to 3\" thick.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eOur small, solid aluminum Mini Bench Clamp is designed to let you fasten our Flex-Mount Face Shields (or any accessory that fits our Dovetail Accessory Plate), anywhere that you would like them to go.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eThe Mini Bench Clamp has our usual two position clamping screw, to allow you to bypass under-table obstructions. The 5\/16\" attachment hole is designed for our Flex-Mount Face Shields, but will mount any accessory that fits our Dovetail Accessory Plate.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26025063621,"sku":"350.120","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Mini-Bench-Clamp_77f57edd-b9db-444d-a8e3-7534d151a2ed.jpg?v=1713398174"},{"product_id":"replacement-delrin-ring-hook","title":"Replacement Delrin Ring Hook","description":"\u003cp class=\"text\"\u003eOur replacement delrin hook—made in the USA, is specifically set up to make cutting rings for sizing a breeze. It can be either right or left handed, and adjusted to any angle you find comfortable on our Knew Concepts Bench Pin. Just unscrew the old one from your Bench Pin and replace it with this new one.\u003c\/p\u003e\n\n\u003cp class=\"KCred text\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e Replacement screws are not included.\u003c\/p\u003e\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26025157893,"sku":"325.110","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Replacement-Delrin-Ring-Hook.jpg?v=1712862206"},{"product_id":"blade-clamp-knobs","title":"Replacement Blade Clamp Knobs","description":"\u003cp class=\"text\"\u003eOne pair of anodized aluminum blade clamping knobs.  Does not include the anvil screws.  (All of the yellow knobs were always anodized aluminum, not brass.  They just look like brass.)\u003c\/p\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eSold in packs of two knobs.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eStandard issue on all current production saws.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMachined from solid billet aluminum, and knurled for positive grip.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eEasily replace the original black plastic Tee knobs.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eThe screw is Grade 8 steel for an extremely long life of usage.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":26025170181,"sku":"125.830","price":14.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Replacement-Blade-Clamp-Knobs.jpg?v=1712861591"},{"product_id":"3-mk4-heavy-duty-hand-saw-with-cam-lever-tension","title":"3\" Mk.IV Heavy Duty Fret Saw with Lever Tension","description":"\u003cp class=\"text\"\u003eDesigned to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 179.1 grams\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePowdercoated aircraft grade aluminum\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eComes loaded with a #7 Fix Blue premium fret saw blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top: 20px;\" class=\"text\"\u003e\u003ca class=\"hyperlink\" title=\"Download Instructions\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/MK4_saw_instructions-web.pdf?v=1711660482\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Mk.IV Saw Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"text\"\u003e\u003cstrong\u003eNow personalizeable too.\u003cbr\u003e\u003c\/strong\u003e We now offer custom laser engraving on all our saws.  We are working on an online system to allow you to lay out your custom design personally, but for now, contact us directly before placing an order, and we'll do it by hand.  \u003c\/p\u003e\n\u003cp class=\"text\"\u003eThere are two possibilities: 1) use a standard Mk. IV frame, which has a small area above the handle side clamp on both sides that is engravable.  There's enough room for a name, or a school ID tag there.  That can be done for $10.  There are also custom frames that have the first two windows above the handle blanked out to give lots of room for a larger inscription, or graphics.  That adds $20 total.  Either version can be done on one or both sides, and the two sides can be different.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":28862780037,"sku":"124.003C","price":99.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/3-inch-Mk.IV-No-Detail-Lever-Tension.jpg?v=1713281883"},{"product_id":"3-mk4-fret-saw-with-lever-tension-and-swivel-blade-clamps","title":"3\" Mk.IV Heavy Duty Fret Saw with Lever Tension and Swivel Blade Clamps","description":"\u003cp class=\"text\"\u003eDesigned to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 185.5 grams\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePowdercoated aircraft grade aluminum\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eComes loaded with a #7 Fix Blue premium fret saw blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\" style=\"margin-top: 20px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/MK4_saw_instructions-web.pdf?v=1711660482\" title=\"Download Instructions\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Mk.IV Saw Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NxQ8Gw8Cmao?si=Uh9smBYW1Z4811AK\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"text\"\u003e\u003cstrong\u003eNow personalizeable too.\u003cbr\u003e\u003c\/strong\u003e We now offer custom laser engraving on all our saws.  We are working on an online system to allow you to lay out your custom design personally, but for now, contact us directly before placing an order, and we'll do it by hand.  \u003c\/p\u003e\n\u003cp class=\"text\"\u003eThere are two possibilities: 1) use a standard Mk. IV frame, which has a small area above the handle side clamp on both sides that is engravable.  There's enough room for a name, or a school ID tag there.  That can be done for $10.  There are also custom frames that have the first two windows above the handle blanked out to give lots of room for a larger inscription, or graphics.  That adds $20 total.  Either version can be done on one or both sides, and the two sides can be different.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":28863075333,"sku":"124.003CS","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/3-inch-MkIV-N-Detail-Lever-Tension-and-swivel-blade-clamps.jpg?v=1713281795"},{"product_id":"5-mk4-heavy-duty-hand-saw-with-cam-lever-tension","title":"5\" Mk.IV Heavy Duty Fret Saw with Lever Tension","description":"\u003cp class=\"text\"\u003eDesigned to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 214.3 grams\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePowdercoated aircraft grade aluminum\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUses 130mm (or 5 1\/8\") fret and jeweler's saw blades\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eComes loaded with a #7 Fix Blue premium fret saw blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\" style=\"margin-top: 20px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/MK4_saw_instructions-web.pdf?v=1711660482\" title=\"Download Instructions\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Mk.IV Saw Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"text\"\u003e\u003cstrong\u003eNow personalizeable too.\u003cbr\u003e\u003c\/strong\u003e We now offer custom laser engraving on all our saws.  We are working on an online system to allow you to lay out your custom design personally, but for now, contact us directly before placing an order, and we'll do it by hand.  \u003c\/p\u003e\n\u003cp class=\"text\"\u003eThere are two possibilities: 1) use a standard Mk. IV frame, which has a small area above the handle side clamp on both sides that is engravable.  There's enough room for a name, or a school ID tag there.  That can be done for $10.  There are also custom frames that have the first two windows above the handle blanked out to give lots of room for a larger inscription, or graphics.  That adds $20 total.  Either version can be done on one or both sides, and the two sides can be different.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":28866298885,"sku":"124.005C","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/5-inch-Mk.IV-No-Detail-Lever-Tension.jpg?v=1713281602"},{"product_id":"5-mk4-heavy-duty-hand-saw-with-cam-lever-tension-and-swivel-blade-clamps","title":"5\" Mk.IV Heavy Duty Fret Saw with Lever Tension and Swivel Blade Clamps","description":"\u003cp class=\"text\"\u003eDesigned to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 228.3 grams\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePowdercoated aircraft grade aluminum\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUses 130mm (or 5 1\/8\") fret and jeweler's saw blades\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eComes loaded with a #7 Fix Blue premium fret saw blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\" style=\"margin-top: 20px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/MK4_saw_instructions-web.pdf?v=1711660482\" title=\"Download Instructions\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Mk.IV Saw Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NxQ8Gw8Cmao?si=Uh9smBYW1Z4811AK\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"text\"\u003e\u003cstrong\u003eNow personalizeable too.\u003cbr\u003e\u003c\/strong\u003e We now offer custom laser engraving on all our saws.  We are working on an online system to allow you to lay out your custom design personally, but for now, contact us directly before placing an order, and we'll do it by hand.  \u003c\/p\u003e\n\u003cp class=\"text\"\u003eThere are two possibilities: 1) use a standard Mk. IV frame, which has a small area above the handle side clamp on both sides that is engravable.  There's enough room for a name, or a school ID tag there.  That can be done for $10.  There are also custom frames that have the first two windows above the handle blanked out to give lots of room for a larger inscription, or graphics.  That adds $20 total.  Either version can be done on one or both sides, and the two sides can be different.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":28866349573,"sku":"124.005CS","price":129.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/5-inch-MkIV-No-Detail-Lever-Tension-and-swivel-blade-clamps.jpg?v=1713281502"},{"product_id":"8-mk4-heavy-duty-hand-saw-with-cam-lever-tension","title":"8\" Mk.IV Heavy Duty Fret Saw with Lever Tension","description":"\u003cp class=\"text\"\u003eDesigned to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 266.4 grams\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePowdercoated aircraft grade aluminum\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eComes loaded with a #7 Fix Blue premium fret saw blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\" style=\"margin-top: 20px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/MK4_saw_instructions-web.pdf?v=1711660482\" title=\"Download Instructions\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Mk.IV Saw Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"text\"\u003e\u003cstrong\u003eNow personalizeable too.\u003cbr\u003e\u003c\/strong\u003e We now offer custom laser engraving on all our saws.  We are working on an online system to allow you to lay out your custom design personally, but for now, contact us directly before placing an order, and we'll do it by hand.  \u003c\/p\u003e\n\u003cp class=\"text\"\u003eThere are two possibilities: 1) use a standard Mk. IV frame, which has a small area above the handle side clamp on both sides that is engravable.  There's enough room for a name, or a school ID tag there.  That can be done for $10.  There are also custom frames that have the first two windows above the handle blanked out to give lots of room for a larger inscription, or graphics.  That adds $20 total.  Either version can be done on one or both sides, and the two sides can be different.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":28866762629,"sku":"124.008C","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/8-inch-Mk.IV-No-Detail-Lever-Tension.jpg?v=1713281353"},{"product_id":"8-mk4-heavy-duty-hand-saw-with-cam-lever-tension-and-swivel-blade-clamps","title":"8\" Mk.IV Heavy Duty Fret Saw with Lever Tension and Swivel Blade Clamps","description":"\u003cp class=\"text\"\u003eDesigned to pull 50–60 pounds of tension on their blades, which makes it much stronger, and the blades vibrate less than our Mk3 saws. They are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red and is extremely scratch and damage resistant.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Cam Lever Tension is designed for rapid, repetitive blade changes (when piercing for example). The tension does not change when re-setting the blade. Simply flip the lever forward to release tension, re-position and clamp the blade, and flip the lever to the rear, and you are sawing.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Swivel Blade Clamps can rotate the saw blade a full 360°, with click stops every 45°.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eWeighs only 275 grams\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eAnodized aircraft grade aluminum\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eComes loaded with a #7 Fix Blue premium fret saw blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\" style=\"margin-top: 20px;\"\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/MK4_saw_instructions-web.pdf?v=1711660482\" title=\"Download Instructions\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Mk.IV Saw Instructions\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/NxQ8Gw8Cmao?si=Uh9smBYW1Z4811AK\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: center;\" class=\"text\"\u003e\u003cstrong\u003eNow personalizeable too.\u003cbr\u003e\u003c\/strong\u003e We now offer custom laser engraving on all our saws.  We are working on an online system to allow you to lay out your custom design personally, but for now, contact us directly before placing an order, and we'll do it by hand.  \u003c\/p\u003e\n\u003cp class=\"text\"\u003eThere are two possibilities: 1) use a standard Mk. IV frame, which has a small area above the handle side clamp on both sides that is engravable.  There's enough room for a name, or a school ID tag there.  That can be done for $10.  There are also custom frames that have the first two windows above the handle blanked out to give lots of room for a larger inscription, or graphics.  That adds $20 total.  Either version can be done on one or both sides, and the two sides can be different.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":28866837509,"sku":"124.008CS","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/8-inch-MkIV-No-Detail-Lever-Tension-and-swivel-blade-clamps.jpg?v=1713281145"},{"product_id":"titanium-soldering-trivet","title":"Titanium Soldering Trivet","description":"\u003ch3\u003eWhat does it do?\u003c\/h3\u003e\n\u003cp class=\"text\"\u003eOur American made Titanium Trivets let you heat your piece from underneath, without stealing the heat.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/A9fLcxiHEHw?si=CVC5ks-kQI1X79sz\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003eThese titanium trivets have advantages over traditional iron trivets (or iron screens), such as:\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eTitanium doesn’t steal heat like iron does, so you can concentrate on soldering your piece, and not the prop.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eSolder and enamel don’t stick to titanium, so you don’t need to worry about that either.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp class=\"text\"\u003eThe reason you want to get the piece up in the air is so that you can heat from underneath. That will let you do delicate things like soldering bezels down without worrying about melting them, which is a real risk if you heat from the top. The baseplate is usually the heaviest, thickest part of the piece which means that it takes the most heat to bring it up to the proper temperature for soldering. If you can heat the baseplate from the back—where there are fewer delicate bits, there’s less risk to the delicate parts on the front, and your soldering goes easier. You can also heat more aggressively from the back, which will help as well.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003cspan class=\"KCred\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e\u003c\/span\u003e Due to the high volume, we had to make some up out of sheet titanium. They will look a little different, but perform the same or better.\u003c\/p\u003e\n\n","brand":"Knew Concepts","offers":[{"title":"One trivet (1)","offer_id":12320325566550,"sku":"500.120","price":20.0,"currency_code":"USD","in_stock":true},{"title":"Three trivets (3)","offer_id":12320325926998,"sku":"500.120.2","price":55.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Titanium-Trivet_20712321-8d9b-41d7-a4f1-daccf3b8d088.jpg?v=1713398850"},{"product_id":"slip-on-foam-comfort-grip","title":"Slip-on Foam Comfort Grip","description":"\u003cp class=\"text strong\"\u003eAvailable only for our Mk.III, Mk.IV, and Titanium Hand Saws.\u003c\/p\u003e\n\u003cp class=\"KCred text\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e The grip does not fit our Coping Saw, it has a different handle.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eThe simplest way to reduce the stress on your hands of long hours of sawing is to increase the diameter of the saw’s handle.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eWhich is where our new American made Comfort Grips come in: they increase the diameter of the saw’s handle without adding weight, while they also make the handle softer and easier to hang onto. All of which reduces hand stress and fatigue.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eThey just slip over the existing handles of our Mk.III, Mk.IV, and Titanium saws. They take about 15 seconds to install, by sliding them on.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":12725255045206,"sku":"125.870","price":5.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Slip-on-Foam-Comfort-Grip-up-close.jpg?v=1712861261"},{"product_id":"marquetry-saw-base-units-with-legs","title":"Marquetry Saw Base Units with Legs","description":"\u003ch3\u003eLee Marshall Edition Marquetry Saws\u003c\/h3\u003e\n\n\u003cp class=\"text\"\u003eAt long last, Lee and Brian’s last collaboration is done. The Marquetry saw is available. Each one is made in the USA with anodized aircraft grade aluminum and is hand built to order. Unlike a traditional marquetry chevalet, these saws incorporate blade clamps that can swivel on the fly, in the same manner as the legendary Fenner patent saw from the 1880’s. Except ours has ball bearings to make sure the action is smooth and easy. It also has ball bearings on the guide rod, so the reciprocating action is silky smooth. The rotate-on-the-fly clamps let you cut a profile into your packet without moving the packet at all.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GLUfxg24GjM?si=c9kNnEIZRvFjY56j\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003eThe Marquetry Saw also has no shop footprint when it’s not in use. They can be put away on a shelf, or taken to a workshop. All they need is a work table to clamp themselves to, and they’re ready to cut.\u003c\/p\u003e\n\n\u003ch3\u003eMarquetry Saw Buying Options\u003c\/h3\u003e\n\u003cp class=\"text\"\u003eThe saw is designed to be modular, which means it can have several different sizes of leg. There are three sizes available: 12\", 18\" and 24\" depth of cut. You purchase a base unit saw, and then select which size legs you want. If you want more than one set of legs, you can buy the others as separate items. They’re modular, so they just swap in. We did computerized stress analysis on the legs to make sure that even the 24\" leg set pulls the same 60 pounds of tension that our standard 3\" Mk4 fret saw does. Picture a 2 foot deep saw that cuts just as fast and accurately as a 3\" saw. That means the tension capability of the smaller sizes is simply unbelievable.\u003c\/p\u003e\n\n\u003ch3\u003eMarquetry Saw Blades\u003c\/h3\u003e\n\u003cp class=\"text\"\u003eMore important, for those wanting to do truly intricate marquetry, our design can use traditional 160mm marquetry blades, but it can also use standard 130mm (5 1\/8\") fret saw blades. This matters because the smallest marquetry blade made is only 2\/0 (0.010\"), while jeweler’s fret saw blades go all the way down to 10\/0. (0.005\"). Standard 130mm fret saw (jeweler’s) blades are also far easier to find. Any blade supplier will have them, rather than the hassle of finding the longer 160mm size that traditional chevalets require. (We have those too, of course.)\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003ca href=\"\" title=\"Marquetry Saw Blades\" class=\"hyperlink\"\u003eShop for Marquetry Saw blades here.\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch3\u003eMarquetry Saw Handles\u003c\/h3\u003e\n\u003cp class=\"text\"\u003eThe saw handles are hand made by a local woodworker. The current batch are Purple Heart, but if you have some particular wood you’d prefer (except Cocobolo), we can probably arrange it. Let us know your preferences on saw handle size too, and we will do what we can to accommodate you.\u003c\/p\u003e\n\n\u003ch3\u003eShipping\u003c\/h3\u003e\n\u003cp class=\"text\"\u003eEach one is hand built to order, and will be shipped in order. Current builds are running 4–6 weeks out.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eLooking for a smaller Marquetry Saw? \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/modular-marquetry-saw\" title=\"Modular Marquetry Saw\" class=\"hyperlink\"\u003eSee our Modular Marquetry Saw.\u003c\/a\u003e\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"12-inch Legs","offer_id":29660253913174,"sku":"120.112","price":2440.0,"currency_code":"USD","in_stock":true},{"title":"18-inch Legs","offer_id":29660253945942,"sku":"120.118","price":2470.0,"currency_code":"USD","in_stock":true},{"title":"24-inch Legs","offer_id":29660253978710,"sku":"120.124","price":2495.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/12-inch-Marquetry-Saw.jpg?v=1712617905"},{"product_id":"marquetry-saw-legs","title":"Marquetry Saw Legs","description":"\u003cp class=\"text\"\u003eThe saw legs are designed to attach to the modular \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/marquetry-saw-base-units-with-legs\" title=\"Marquetry Saw Base Unit\" class=\"hyperlink\"\u003eMarquetry Saw Base Unit\u003c\/a\u003e, which can have several different sizes of legs.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eChoose from 3 sizes (depth of cut):\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"bullet-list\"\u003e12\" depth\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003e18\" depth\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003e24\" depth\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003cp class=\"text\"\u003eIf you want more than one set of legs, you can buy these Marquetry Saw Legs as separate items, but \u003cspan class=\"strong\"\u003eyou must have the \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/marquetry-saw-base-units-with-legs\" title=\"Marquetry Saw Base Unit\" class=\"hyperlink\"\u003eMarquetry Saw Base Unit\u003c\/a\u003e\u003c\/span\u003e, (which comes with a set of legs of your choosing) for these legs to attach to. They’re all modular, so they just swap in.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/GLUfxg24GjM?si=iqMiH0TsvRNjwwSZ\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003cp class=\"text\" style=\"margin-top: 20px;\"\u003eWe did computerized stress analysis on the legs to make sure that even the 24\" leg set pulls the same 60 pounds of tension that our standard 3\" Mk4 fret saw does. Picture a 2 foot deep saw that cuts just as fast and accurately as a 3\" saw. That means the tension capability of the smaller sizes is simply unbelievable.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"12-inch Legs","offer_id":29660324003926,"sku":"120.526","price":190.0,"currency_code":"USD","in_stock":true},{"title":"18-inch Legs","offer_id":29660324036694,"sku":"120.524","price":220.0,"currency_code":"USD","in_stock":true},{"title":"24-inch Legs","offer_id":29660324069462,"sku":"120.522","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Marquetry-Saw-legs.jpg?v=1712784229"},{"product_id":"stepped-delrin-ring-filing-pin","title":"Stepped Delrin Ring Filing Pin","description":"\u003cp class=\"text\"\u003eA little something different: a black delrin ring pin—made in the USA, is designed with steps to hold rings while you file, as well as a slot specifically set up to make cutting rings for sizing a breeze. It can be either right or left handed, and adjusted to any angle you find comfortable on our Knew Concepts Bench Pin. Just unscrew the old one from your Bench Pin and replace it with this new one.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e\u003ci class=\"KCred fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e Requires one of our stainless steel\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/bench-pin\" class=\"hyperlink\"\u003eKnew Concepts Bench Pin (Item #325.100)\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto mount onto.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":31568795435094,"sku":"325.114","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Stepped-Delrin-Ring-Filing-Pin_fb2b358d-68d3-40b1-a257-63ebafe478ae.jpg?v=1713396873"},{"product_id":"grs-wooden-bench-pin-birds-mouth","title":"GRS Wooden Bench Pin (Bird's Mouth)","description":"\u003cp class=\"text\"\u003eFor those who want a wooden bench pin (or bird’s mouth) that they can customize however they’d like, here is GRS’s original wooden bench pin. Made in the US, it fits all of our dovetail bench mounts, or GRS’s benchmate mounts. (They’re the same.) It pops on and off the dovetail in seconds, and can be easily removed and replaced with any of either our or GRS’s great line of other widgets that fit onto the dovetail system.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eThe purpose of the wooden one, as opposed to our normal stainless steel piercing plate is to allow the end user to customize the shape and pattern of the working area however they’d like. All it takes is a wood saw.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eFor piercing, you want to orient the wooden part so that the flat side is facing up. Or, if you’d rather, you can leave it with the angled side facing up, and use it to brace small parts for filing. The possibilities are endless.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003cspan class=\"KCred strong\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e Note for Knew Concepts distributors:\u003c\/span\u003e This item is manufactured by GRS, and is not available for wholesale purchase through Knew Concepts. If you’d like to order them for resale, \u003ca href=\"https:\/\/knewconcepts.com\/contact-form\/\" class=\"hyperlink\" target=\"blank\"\u003econtact us\u003c\/a\u003e and we can assist you in contacting GRS.\u003c\/p\u003e\n","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":31912023097430,"sku":"325.200","price":49.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/GRS-Wooden-Bench-Pin_36b9e1d4-54e7-4fb5-b52d-8ea59349edb3.jpg?v=1713396731"},{"product_id":"replacement-swivel-blade-clamps-for-mk-iv-saws","title":"Replacement Swivel Blade Clamps for Mk.IV Saws","description":"\u003cp class=\"text\"\u003e\u003cspan class=\"strong KCred\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e\u003c\/span\u003e This replacement set of solid blade clamps—made in the USA, is for newer Mk.IV fret\/jeweler’s saws. \u003cspan class=\"strong\"\u003eThey will not fit Mk.III saws, Titanium (birdcage) saws, or Coping saws.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003ch5 style=\"margin-bottom: 20px;\"\u003eReplacement Instructions\u003c\/h5\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eUse a 5\/64\" allen wrench to loosen the set screws in the clamp at the handle end of the saw and remove clamp.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eReplace with the new clamp, re-tighten the set screws. Note the location of the brass knob on the screw for front\/upper old clamp.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUnscrew the brass knob from the old upper\/front clamp, and remove it.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eUnscrew brass knob from new clamp, thread it back through the hole in the axle (if you have a lever saw) and replace the brass knob on the end of the screw.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eAdjust until you can tension a blade properly. Start by putting the new knob in roughly the same position as the old one. Stop if you see any screw sticking out of the back of the brass knob, that’s too tight.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":33501642784854,"sku":"124.850","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/swivel-blade-clamps-for-MkIV.jpg?v=1712939090"},{"product_id":"mk-iv-precision-die-saw","title":"Mk.IV Precision Die Saw","description":"\u003cp class=\"text\"\u003eNew, and totally redesigned Mk IV Precision Saw Guide. Now in two versions: one optimized for jewelry tasks like blanking and matrix dies, and one optimized for marquetry cutting. This page is the listing for the Die Saw version. The Small Marquetry Saw will be listed separately.\u003c\/p\u003e\n\n\u003ch5\u003eThe Mk4 versions have been improved in other areas:\u003c\/h5\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eThe saw frame is now one of our heavy duty Mk4 saws, for increased tension.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eThis Die Saw version has a tilting bench pin optimized for cutting dies and wax.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eBoth versions are available with either a pair of dovetail plates to mount the saws to the bench by way of screwed on dovetail plates, or with a pair of dovetail clamps, which allow the saws to be moved around the shop, or taken to workshops or other locations.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eBoth versions come off the dovetails quickly and easily, allowing for instant storage.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eFreeing up valuable bench space when not in use.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eBoth versions have built in protractors for easy angle settings. The Die Saw version also has a system of speed wheels that allow for quick setting of common angles without needing to watch the protractor.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" style=\"margin-bottom:30px;\" src=\"https:\/\/www.youtube.com\/embed\/QnGL9sF_7iA?si=B7PLVY1pID6z0QVo\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n\u003ch5\u003eThe biggest improvement?\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eThe biggest improvement is the new saw guide tower with ball bearing slides. The new guide tower lets the saw swing fore-and-aft as you cut, which is a much more natural motion for sawing. This improves ease of use, as well as radically reducing the effort of cutting, as compared to previous die saw designs.\u003c\/p\u003e\n\n\u003ch5\u003eWhat’s the difference between the various versions?\u003c\/h5\u003e\n\n\u003cp class=\"text\"\u003eFirst, there are two distinct saws:\u003c\/p\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eOne for cutting dies. This page is for the die saw version.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eOne for marquetry. \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/marquetry-saw-base-units-with-legs\" title=\"The Marquetry Saws\" class=\"hyperlink\"\u003eThe Marquetry Saws are listed here.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\"\u003eAfter that, you can pick which kind of dovetail mount you need. The system requires two dovetails. But how those dovetails hang on to your bench is up to you. You can either get bare dovetails that must be screwed in place onto your bench, or you can get a pair of dovetail clamps, which have the dovetails mounted onto clamps. That will let your saw go anywhere you need it to. The dovetails are also good for mounting any other dovetail system tool you already own, like our stainless bench pin, or any of GRS’s vast line of dovetail accessories for jewelers and engravers.\u003c\/p\u003e\n\n","brand":"Knew Concepts","offers":[{"title":"Mk.IV die saw with 8\" saw and 2 dovetail plates","offer_id":39575679500374,"sku":"304.008","price":725.0,"currency_code":"USD","in_stock":true},{"title":"Mk.IV die saw with 8\" saw and 2 dovetail clamps","offer_id":39575682449494,"sku":"304.018","price":900.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Precision-Die-Saw-Mk.IV.jpg?v=1713215025"},{"product_id":"marquetry-saw-bench-pin","title":"Marquetry Saw Bench Pin","description":"\u003cp class=\"text\"\u003eThe large stainless steel bench pin that comes with our marquetry saws, now available by itself.  4.375\" x 6.375\", instead of the 3x5 of our normal stainless bench pin, this is a larger pin for those who need more support, or want to work with larger items.  It mounts to our dovetails, as well as GRS’s benchmate dovetails, so you can use it with either system.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eIt has a variety of cutting areas, to support piercing from large freeform work in the central clearance, to detailed cutting in the small coves to either side, as well as the long thin slot for maximum support.  The 1\" gap in the central cove is also just right for holding a jeweler’s ring clamp.  The four 1\/4\" holes are for adding a wooden coverplate to allow for specialized zero clearance applications.  (More for the marquetry saw than hand cutting, but it’s a bit of added versatility for those in need.)\u003c\/p\u003e\n\u003cp class=\"text\"\u003eMade from solid 3\/16\" stainless steel, it won’t bend or flex, and the shavings from stainless steel won't contaminate your sweeps the way aluminum will.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":39627257741398,"sku":"120.584","price":50.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Marquetry-Saw-Bench-Pin.jpg?v=1715181895"},{"product_id":"pegas-skip-tooth-blades","title":"Woodworking Saw Blades: Pegas Skip Tooth Saw Blades","description":"\u003cp class=\"text\"\u003eSkip toothed fret saw blades. These blades have a little extra space between their teeth, which makes them clear sawdust and other sticky things better than standard blades.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eChoose from 4 sizes:\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"bullet-list\"\u003eSize #7 Skip Tooth Blade\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003eSize #2\/0 Skip Tooth Blade\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003eSize #2 Skip Tooth Blade\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003eSize #4 Skip Tooth Blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eSold in packs of 12\u003c\/li\u003e  \n\u003c\/ul\u003e\n\n\n\n\u003cp class=\"text\"\u003eThose are the blades we recommend for general dovetail work. But these blades can do so much more: they're great for cutting jewelers wax, and plastics, especially lexan for matrix dies. Which is why we have the smaller sizes. They enable tighter turns and more detail.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eKnew Concepts fret saws ship with #7 skip tooth blade pre-installed and is our best recommendation for general dovetail cutting.\u003c\/p\u003e\n\n\u003cp class=\"KCred text\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e These blades are for fret saws, they will not fit coping saws.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Size #7 Skip Tooth Blade","offer_id":40208116613206,"sku":"200.007-SK","price":5.0,"currency_code":"USD","in_stock":false},{"title":"Size #2\/0 Skip Tooth Blade","offer_id":40208116514902,"sku":"200.020-SK","price":7.0,"currency_code":"USD","in_stock":true},{"title":"Size #2 Skip Tooth Blade","offer_id":40208116547670,"sku":"200.002-SK","price":7.0,"currency_code":"USD","in_stock":false},{"title":"Size #4 Skip Tooth Blade","offer_id":40208116580438,"sku":"200.004-SK","price":7.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Pegas-Skip-Tooth-Saw-Blades.jpg?v=1712782386"},{"product_id":"pegas-reversed-skip-tooth-blades","title":"Woodworking Saw Blades: Pegas Reversed Skip Tooth Saw Blades","description":"\u003cp class=\"text\"\u003eThese skip toothed blades have the same wide gullets as the normal skip toothed blades, but the bottom inch of the blade has the teeth reversed, so they cut on the up stroke. This reduces tearout on delicate woods. It's most effective on woods thicker than 1\/2\", and absolutely great in a scroll saw.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eChoose from 2 sizes:\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"bullet-list\"\u003eSize #5R Reversed Skip Tooth Blade\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003eSize #7R Reversed Skip Tooth Blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eSold in packs of 12\u003c\/li\u003e  \n\u003c\/ul\u003e\n\n\u003cp class=\"KCred text\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e These blades are for fret saws, they will not fit coping saws.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Size #5R Reversed Skip Tooth Blade","offer_id":40208686678102,"sku":"200.005-SKR","price":5.0,"currency_code":"USD","in_stock":true},{"title":"Size #7R Reversed Skip Tooth Blade","offer_id":40208686710870,"sku":"200.007-SKR","price":5.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Pegas-Reverse-Skip-Tooth-Fret-Saw-Blades.jpg?v=1712781947"},{"product_id":"pegas-super-skip-tooth-fret-saw-blades","title":"Woodworking Saw Blades: Pegas Super Skip Tooth Saw Blades","description":"\u003cp class=\"text\"\u003eThese are fret saw blades with extra wide gaps between the teeth for clearing sawdust out of really thick stock, or exceptionally gummy woods. They are also very good for the plastics and waxes jewelers use. The extra wide tooth spacing means they are not the ideal choice for thinner material, but great for thicker things.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eSpecifications\u003c\/span\u003e\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eChoose from 3 sizes:\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"bullet-list\"\u003eSize #2\/0 Super Skip Tooth Blade\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003eSize #1 Super Skip Tooth Blade\u003c\/li\u003e\n\u003cli class=\"bullet-list\"\u003eSize #4 Super Skip Tooth Blade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eSold in packs of 12\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"KCred text\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e These blades are for fret saws, they will not fit coping saws.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Size #2\/0 Super Skip Tooth Blade","offer_id":40208693493846,"sku":"201.020-SSK","price":5.0,"currency_code":"USD","in_stock":true},{"title":"Size #4 Super Skip Tooth Blade","offer_id":40208693526614,"sku":"201.004-SSK","price":5.0,"currency_code":"USD","in_stock":true},{"title":"#1 Super Skip Tooth Blade","offer_id":42022042337366,"sku":"201.001-SSK","price":7.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Pegas-Super-Skip-Tooth-Fret-Saw-Blades.jpg?v=1712782481"},{"product_id":"modular-marquetry-saw","title":"Modular Marquetry Saw","description":"\u003cp class=\"text\"\u003eIntroducing our new smaller marquetry saw. This is a cousin to our new Mk IV Die saw, but optimized for marquetry instead of cutting dies for jewelers.\u003c\/p\u003e\n\u003ch5\u003eThe compact marquetry saw:\u003c\/h5\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eIs only small compared with the 24\" legs of the Lee Marshall edition Marquetry Saw.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eIt comes with either an 8\" or 12\" heavy duty fret saw for great reach and control.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eThis marquetry version has a tilting guide tower, so that the saw tilts over for double bevel work, rather than the packet. So you don’t have to worry about the packet hitting your tabletop.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eIt is available with either a pair of dovetail plates to mount to the bench by way of screwed on dovetail plates, or with a pair of dovetail clamps, which allow the saw to be moved around the shop, or taken to workshops or other locations.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eIt comes off the dovetails quickly and easily, allowing for instant storage.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eFreeing up valuable bench space when not in use.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eIt has a built in protractor for easy angle settings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" style=\"margin-bottom: 30px;\" src=\"https:\/\/www.youtube.com\/embed\/QnGL9sF_7iA?si=B7PLVY1pID6z0QVo\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5\u003eThe biggest improvement?\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eThe biggest improvement is the new saw guide tower with ball bearing slides. The new guide tower lets the saw swing fore-and-aft as you cut, which is a much more natural motion for sawing. This improves ease of use, as well as radically reducing the effort of cutting.\u003c\/p\u003e\n\u003ch5\u003eWhat’s the difference between the various versions?\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eMainly in how the saw attaches to your workbench. The saw is in two pieces: the guide tower \u0026amp; saw unit, and a bench pin to support the work. They need to hang on to your workbench. They use a set of industry standard dovetails to do this. You can either get just the dovetails by themselves, and screw them permanently into the edge of your workbench. Or, you can get the dovetails attached to a pair of clamps that grab onto your workbench. That will let your saw go anywhere you need it to. The dovetails are also good for mounting any other dovetail system tool you already own, like our stainless bench pin, or any of GRS’s vast line of dovetail accessories for jewelers and engravers.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eLooking for a larger Marquetry Saw? \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/marquetry-saw-base-units-with-legs\" title=\"Lee Marshall edition Marquetry Saw.\" class=\"hyperlink\"\u003eSee our Lee Marshall edition Marquetry Saw.\u003c\/a\u003e\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"8\" Compact Marquetry Saw with Dovetail Only","offer_id":40246302343254,"sku":"306.008","price":725.0,"currency_code":"USD","in_stock":true},{"title":"8\" Compact Marquetry Saw with Dovetail and Clamp","offer_id":40246302376022,"sku":"306.018","price":900.0,"currency_code":"USD","in_stock":true},{"title":"12\" Compact Marquetry saw with dovetail only","offer_id":42448737632342,"sku":"306.012","price":775.0,"currency_code":"USD","in_stock":true},{"title":"12\" Compact Marquetry saw with 2 dovetail clamps","offer_id":42448749822038,"sku":"306.112","price":950.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Modular-Marquetry-Saw_731bec0a-cfb1-4706-bbe0-446131d0c85f.jpg?v=1713214574"},{"product_id":"bench-pin-risers-1","title":"Bench Pin Risers","description":"\u003ch5\u003eWhat they do:\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eThe risers are designed to allow you to get your dovetail mount (bench pin) up above the surface of any work table. They are adjustable for height, and strong enough to stand up to anything you can dish out. No more wobbly improvised lifts. These things simply will not move. They can adjust for any height from 6.5\" to 10.25\" above the table, in 1\/2\" increments. They can be either screwed down, or clamped in place with C clamps. This lets them go anywhere, and they in turn let you work anywhere. At a workshop, show, or even on the kitchen table. All without wrecking the table.\u003c\/p\u003e\n\u003ch5\u003eWhy you need them:\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eMany makers are working in improvised situations, on work surfaces that are too low for precision work, or on household tables that can’t be dedicated to jewelry work, like the dining room table. It still needs to be available for dinner too. Bending down to deal with a too-low bench pin will quickly wreck your back, and worse, your will. These risers are designed to let you mount any of your dovetail system tools at a better height for working. Thus saving your back, and your enthusiasm. They clamp to the table in seconds, and come off just as quickly, saving dinner. We’ve all gone to workshops that were held in places with only normal height work tables. Entirely too low for precision work. These risers let you take all your dovetail mount tools along with you, and use them properly. All of our dovetail mount tools will fit, as will all of GRS’s benchmate tools, or any other tool fitting that standard.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/AXUwM3hmU1E?si=6CV0e4daAfQYCnwe\" height=\"315\" width=\"560\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp class=\"text\"\u003e \u003c\/p\u003e\n\u003ch5\u003eThe backstory:\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eBrian still teaches jewelry classes on the weekends at a local college, and the studio there only has ‘normal’ work tables. Way too low for jewelry work. Fortunately, a previous instructor made up a set of home-made bench pin towers to let the students work at a more comfortable height. Those towers, nice as they are, won’t mount a dovetail, or any of the dovetail tools. So Brian cooked up these towers to fit that need. We thought we should share.\u003c\/p\u003e\n\u003ch5\u003eThe two versions:\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eThe bench pin risers are available in two versions: steel and aluminum.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eKnew Concepts is known for making long lasting, quality tools. Brian always says he builds tough. So for the bench pin risers, he designed them around panels of 3\/16\" solid steel. Which makes them strong enough to park a truck on. But it also makes them weigh 10 pounds each. Which is great for people who won’t ever move them, but most of us are going to need something easier to lift. So we also make a version with thick tempered aluminum legs that’s nearly as strong, and only 6 pounds each. Much more portable, and still stronger than the table it’s attached to. The two versions are visually identical. The only difference is the material the legs are made from. The other parts are all still solid steel for durability.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eC clamps, if you need them, they are best purchased locally to fit the individual clamping situation. They are not included with the risers.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Aluminum Riser (6 lbs.)","offer_id":40874973954134,"sku":"350.310","price":250.0,"currency_code":"USD","in_stock":true},{"title":"Heavy Duty Steel (10 lbs)","offer_id":40874973986902,"sku":"350.305","price":250.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/bench-pin-risers_81ef57ec-75ca-49e7-8acf-c09a33a87ff6.jpg?v=1711648658"},{"product_id":"dovetail-bench-clamps","title":"Dovetail Bench Clamps","description":"\u003cp class=\"text strong\" style=\"margin-bottom: 8px;\"\u003eWhat They Do\u003c\/p\u003e\n\u003cp class=\"text\"\u003eOur Dovetail Bench Clamps—made in the USA, allow you to mount a standard jeweler’s dovetail plate anywhere you need it. They adjust to tables from a thin 3\/4\" plywood card table at a show, all the way up to a 3.7\" woodworker’s bench at a workshop. (Or the long side of a 2x4, if you have to.) Now your good gear can go anywhere you need it, and hang on tight, just the way you like it.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"100%\" height=\"315\" style=\"margin-top: 20px;\" src=\"https:\/\/www.youtube.com\/embed\/s3yTsDA3pmg?si=q5VCla0kmYuBiCuw\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch5 style=\"margin-top: 20px;\"\u003eTwo Choices of Clamps\u003c\/h5\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003e\n\u003cstrong\u003eDovetail Bench Clamp with Magnet\u003c\/strong\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eThe magnet version of our dovetail bench clamp has a high strength magnet to hold files and burrs where they’re easy to reach, inch and metric rulers, and a pair of circle dividing guides. \u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/KC-Dovetail-Clamp-Web-v2_2c61051f-eb78-40a9-a0ec-68e36f041856.pdf?v=1712872253\" title=\"Download Instructions\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download instructions for the Dovetail Bench Clamp with Magnet\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003e\n\u003cstrong\u003eDovetail Bench Clamp with Anvil\u003c\/strong\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eThe anvil version of our dovetail bench clamp has a 2\" hardened steel disk that allows you to strike it—and your metal work, with hammers or other tools. \u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/KC-Dovetail-Clamp-Anvil-Web-v1_85513b34-e65c-4798-94d1-1390ad1fbe86.pdf?v=1712872253\" title=\"Download Instructions\" class=\"hyperlink\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download instructions for the Dovetail Bench Clamp with Anvil\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text strong\" style=\"margin-bottom: 8px;\"\u003eWhy You Need Them\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe Dovetail Bench Clamps will open up your dovetail accessories to new spots in the studio, and let you take them with you to entirely new places, like shows and workshops-or the beach.\u003c\/p\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eDo you work at home? No reason why you shouldn’t be able to use dovetail accessories, just because you can’t drill holes in your table. That’s what these clamps are for.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eDo you need to use your dovetail gear somewhere else in the studio every so often? That’s what these clamps are for.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eFeel like working out on the patio because it’s a beautiful day? That’s what these clamps are for.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003eYes, they're the same size as the GRS dovetails, so their tools fit our dovetails, and our tools fit theirs.  It's all one big happy sandbox.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"text\"\u003eWhen you’re on the road, trying to clamp something to a table at a show, ever notice that there is always some sort of table edge rail in the exact wrong spot? So did we. In addition to being able to clamp tables from 3\/4\" to 3.7\" thick (19–94mm) there are several different places that the clamp screw can go through, so that at least one of them should be in the clear.\u003c\/p\u003e\n\u003cp class=\"text strong\" style=\"margin-bottom: 8px;\"\u003eWhat They Are\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe clamps themselves are two pieces of aircraft grade aluminum, with a standard dovetail plate, and a clamping screw. The two pieces come apart, and can be screwed back together at various offsets to allow the clamping screw to reach whatever size table is required. (See image)  The upper plate is Milspec class 3 hard anodized, so that it won’t contaminate your files with aluminum if you slip and file it. It is not hard enough to use as an anvil, but it is as hard as aluminum gets, which is enough to resist accidental file cuts. Since the hard aluminum is not hard enough to pound on, we have one version of the clamp that has a 2\" hardened steel disk that you can pound on, or you can chose the version that has a high strength magnet to hold files and burrs where they’re easy to reach, as well as both inch and metric rulers, and a pair of circle dividing guides broken out into divisions of 8 and 6. The choice is yours.\u003c\/p\u003e\n\u003cp class=\"text strong\" style=\"margin-bottom: 8px;\"\u003eThe Back Story\u003c\/p\u003e\n\u003cp class=\"text\"\u003eOnce upon a time, Brian had to demonstrate our first prototypes of the steel bench pin at a show. The bench pin was designed to use the dovetail system. Which presented a problem: how to get a dovetail plate onto a card table? The original dovetail plates were designed to be permanently screwed into a jeweler’s bench. It’s generally considered rude to shoot your host’s tables full of screw holes. That presented a challenge, answered with the very first version of this bench clamp. The clamp got much more attention at the show than we ever expected. Not being fools, we listened, and at long last, here is a much more refined and civilized descendant of that first clamp.\u003c\/p\u003e\n\u003cp class=\"text strong\" style=\"margin-bottom: 8px;\"\u003eMore Background for Woodworkers\u003c\/p\u003e\n\u003cp class=\"text\"\u003eKnew Concepts started out making saws for the jewelry market. Both Brian and Lee had years of experience in that world, and are metalworkers by inclination. The dovetail bench mounting system has become the de facto standard quick-disconnect mount for bench accessories among serious jewelers. There are a wide range of add-ons that can be mounted to it, from small belt sanders, to heat-resistant pads for silver brazing, to multi-axis work clamping systems. The range of available accessories is more limited for the woodworking world, but with the release of our marquetry saws, and the Mk4 Precision Saw Guide, as well as our steel bench pins, and bench risers, we’re aiming to change that.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"With Magnet","offer_id":40874983718998,"sku":"350.100","price":115.0,"currency_code":"USD","in_stock":true},{"title":"With Anvil","offer_id":40874983751766,"sku":"350.105","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Dovetail-Bench-Clamps.jpg?v=1713397010"},{"product_id":"jeweler-s-saw-blades","title":"Herkules White Label Jeweler’s Saw Blades","description":"\u003ch3\u003eSold in Packages of 12\u003c\/h3\u003e\n\u003cp class=\"text\"\u003eHerkules White Label Jeweler’s saw blades are among the finest on Earth. Made in Germany, they are specifically intended for cutting harder metals, like die steel for blanking dies. Which means they last noticeably longer in softer metals like silver and gold. They are also the only line of saw blades that goes all the way down to 10\/0.\u003c\/p\u003e\n\u003cp class=\"text\" style=\"display: none;\"\u003eThese are 130mm (5.125\") jeweler’s blades. They fit all of our saws except the coping saw.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eFor the Jewelers:\u003c\/span\u003e these are the blades you want.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e\u003cspan class=\"strong\"\u003eFor the Woodworkers:\u003c\/span\u003e these probably are not the blades you want. They’re intended for cutting thin metal. They’ll cut wood, but very, very slowly. They’re also incredibly thin by woodworking standards, and thus easy to break. The 10\/0 blades are a smidge thicker than a human hair. With teeth.\u003c\/p\u003e\n\u003ch3 style=\"margin-top: 20px;\"\u003eSizing Information for Jeweler’s Saw Blades\u003c\/h3\u003e\n\u003ctable class=\"blade-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\n\u003cp class=\"text table-text Strong\"\u003eName\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\n\u003cp class=\"text table-text Strong\"\u003eWidth (mm\/inch)\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\n\u003cp class=\"text table-text Strong\"\u003eHeight (mm\/inch)\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\n\u003cp class=\"text table-text Strong\"\u003eTP CM\u003c\/p\u003e\n\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\n\u003cp class=\"text table-text Strong\"\u003eTPI\u003c\/p\u003e\n\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #9\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.55mm\/0.0217\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e1.20mm\/0.0472\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e10\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e25.4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.50mm\/0.0197\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e1.12mm\/0.0441\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e11\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e27.9\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.48mm\/0.0189\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e1.02mm\/0.0402\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e12\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e30.5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.44 mm\/0.0173\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.95 mm\/0.0374\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e13\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e33.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #5\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.40 mm \/ 0.0157\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.85 mm \/ 0.0335\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e14\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e35.6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.38 mm \/ 0.015\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.80 mm \/ 0.0315\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e15\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e38.1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.36 mm \/ 0.0142\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.75 mm \/ 0.0295\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e16\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e40.6\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.34 mm \/ 0.0134\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.70 mm \/ 0.0276\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e17\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e43.2\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.30 mm \/ 0.0118\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.60 mm \/ 0.0236\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e18\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e45.7\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.28 mm \/ 0.011\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.56 mm \/ 0.0220″\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e20\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e50.8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #2\/0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.26 mm \/ 0.0102\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.52 mm \/ 0.0205″\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e22\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e55.9\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #3\/0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.24 mm \/ 0.0094\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.48 mm \/ 0.0189\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e24\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e61.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #4\/0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.22 mm \/ 0.0087\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.44 mm \/ 0.0173\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e26\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e66.0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #5\/0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.20 mm \/ 0.0079\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.40 mm \/ 0.0157\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e28\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e71.1\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #6\/0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.18 mm \/ 0.0071\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.36 mm \/ 0.0142\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e32\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e81.3\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #8\/0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.16 mm \/ 0.0063\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.32 mm \/ 0.0126\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e35\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e88.9\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003eHerkules #10\/0\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.14 mm \/ 0.0055\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e0.30 mm \/ 0.0118\"\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e36\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cp class=\"text table-text\"\u003e91.4\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"margin-top: 20px;\" class=\"text\"\u003e\u003ca class=\"hyperlink\" title=\"Download Jeweler’s Saw Blade Sizing Charts (inch and metric)\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/KC-Saw-Sizing-Fullsize-both.pdf?v=1712694291\" target=\"blank\"\u003e\u003ci class=\"fa fa-download\"\u003e\u003c\/i\u003e Download Jeweler’s Saw Blade Sizing Charts.\u003c\/a\u003e There are two charts: U.S. inch and metric. Pick whichever you prefer. The small charts only go from 10 to 10\/0, while the fullsize chart starts at size 16, and goes down to 10\/0. These charts are intended to give you information that will help you pick the right blade for your project.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThis chart information is for jeweler’s saw blades, which are intended for metal. (Woodworking blades are the same length, but have coarser teeth. )\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThis information for jeweler’s blades is based on data provided by the manufacturer specifically for the Herkules White Label blades that we carry. Other manufacturer’s blades should be close to the same measurements, but they may not be exactly the same.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Herkules #9 (1 dozen)","offer_id":40994325397590,"sku":"210.009","price":9.75,"currency_code":"USD","in_stock":true},{"title":"Herkules #8 (1 dozen)","offer_id":40994325430358,"sku":"210.008","price":8.9,"currency_code":"USD","in_stock":true},{"title":"Herkules #7 (1 dozen)","offer_id":40994325463126,"sku":"210.007","price":8.09,"currency_code":"USD","in_stock":true},{"title":"Herkules #6 (1 dozen)","offer_id":40994325495894,"sku":"210.006","price":7.36,"currency_code":"USD","in_stock":true},{"title":"Herkules #5 (1 dozen)","offer_id":40994325528662,"sku":"210.005","price":6.67,"currency_code":"USD","in_stock":true},{"title":"Herkules #4 (1 dozen)","offer_id":40994325561430,"sku":"210.004","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Herkules #3 (1 dozen)","offer_id":40994325594198,"sku":"210.003","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Herkules #2 (1 dozen)","offer_id":40994325626966,"sku":"210.002","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Herkules #1 (1 dozen)","offer_id":40994325659734,"sku":"210.001","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Herkules #0 (1 dozen)","offer_id":40994325692502,"sku":"210.000","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Herkules #2\/0 (1 dozen)","offer_id":40994325725270,"sku":"210.020","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Herkules #3\/0 (1 dozen)","offer_id":40994325758038,"sku":"210.030","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Herkules #4\/0 (1 dozen)","offer_id":40994325790806,"sku":"210.040","price":6.67,"currency_code":"USD","in_stock":true},{"title":"Herkules #5\/0 (1 dozen)","offer_id":40994325823574,"sku":"210.050","price":7.36,"currency_code":"USD","in_stock":true},{"title":"Herkules #6\/0 (1 dozen)","offer_id":40994325856342,"sku":"210.060","price":8.09,"currency_code":"USD","in_stock":true},{"title":"Herkules #8\/0 (1 dozen)","offer_id":40994325889110,"sku":"210.080","price":9.75,"currency_code":"USD","in_stock":true},{"title":"Herkules #10\/0 (1 dozen)","offer_id":40994325921878,"sku":"210.010","price":11.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Herkules-jewelers-saw-blades.jpg?v=1712703816"},{"product_id":"marquetry-pebeco-saw-blades","title":"160mm Marquetry Saw Blades","description":"\u003cp class=\"text strong\"\u003e\u003ci class=\"fa fa-exclamation-triangle KCred\"\u003e\u003c\/i\u003e These are 160mm marquetry blades. These blades only fit large format marquetry saws.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eUnless you already know you have one of these saw frames, and know why you're looking for 160mm marquetry blades, these are NOT the blades you are looking for.\u003c\/p\u003e\n\n\u003ctable class=\"blade-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cp class=\"text table-text Strong\"\u003eName\u003c\/p\u003e\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\u003cp class=\"text table-text Strong\"\u003eWidth (mm\/inch)\u003c\/p\u003e\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\u003cp class=\"text table-text Strong\"\u003eHeight (mm\/inch)\u003c\/p\u003e\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\u003cp class=\"text table-text Strong\"\u003eTP CM\u003c\/p\u003e\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e\u003cp class=\"text table-text Strong\"\u003eTPI\u003c\/p\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003ePebeco #2\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e0.32mm\/0.0125\"\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e0.85mm\/0.033\"\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e22\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e43\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003ePebeco #2\/0\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e0.25mm\/0.009\"\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e0.58mm\/0.022\"\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e17\u003c\/p\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cp class=\"text table-text\"\u003e56\u003c\/p\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Knew Concepts","offers":[{"title":"Pebeco #2","offer_id":41000941584470,"sku":"212.002","price":10.03,"currency_code":"USD","in_stock":true},{"title":"Pebeco #2\/0","offer_id":41000941617238,"sku":"212.010","price":10.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Pebeco.jpg?v=1712789301"},{"product_id":"guillotine-clamps","title":"Guillotine Clamps","description":"\u003cp class=\"text\"\u003eA long forgotten bench tool, revived for modern metalsmiths: the guillotine. Not for cutting off heads, but for saving fingers.\u003c\/p\u003e\n\n\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Z_He7gy7fhk?si=qvQCYSM1WAUle_Of\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\t\t\t\t\t\t\t\t\t\t\n\n\n\t\t\t\t\t\n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003eRelieve the strain of holding small parts steady using just your fingers and hands with the Knew Concepts guillotine clamp. This handy tool is the modern incarnation of an age-old bench tool. Mounted perpendicularly on two parallel threaded posts, the steel jaws of the guillotine clamp are lined with soft, non-marring wood. Use the adjustment nuts to close the jaws against any small part; the two wood liners secure the part while you pierce, saw or file. The flat profile makes many tasks much easier than the same jobs would be in a traditional ring clamp. The clamping action also frees your fingers from the strain of holding tiny parts steady while you work; tighten the jaws with the set-screws, and the clamp does the job.\u003c\/p\u003e\n\n\u003ch5 style=\"margin-top: 20px;\"\u003eTwo Choices of Clamps\u003c\/h5\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003e\n\u003cstrong\u003eStainless Steel\u003c\/strong\u003e\n\t\u003cul class=\"bullet-list\"\u003e\n\t\u003cli class=\"bullet-list\"\u003eDimensions: 2-¼\"W x ¼\"D x 2-ț\"H\u003c\/li\u003e\n\t\u003cli class=\"bullet-list\"\u003eMetal type: Stainless steel\u003c\/li\u003e\n\t\u003cli class=\"bullet-list\"\u003eMaximum opening size: 1-¾\"W x ¾\"H (43 x 18mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\n\u003cli class=\"text bullet-list\"\u003e\n\u003cstrong\u003eSolid Brass\u003c\/strong\u003e\n\t\u003cul class=\"bullet-list\"\u003e\n\t\u003cli class=\"bullet-list\"\u003eDimensions: 2-¼\"W x ¼\"D x 2-⅛\"H\u003c\/li\u003e\n\t\u003cli class=\"bullet-list\"\u003eMetal type: Brass\u003c\/li\u003e\n\t\u003cli class=\"bullet-list\"\u003eMaximum opening size: 1-¾\"W x ¾\"H (43 x 18mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\t\t\t\t\t\t\t\t\t\t\n\t","brand":"Knew Concepts","offers":[{"title":"Solid Brass","offer_id":41013181775958,"sku":"500.100","price":45.0,"currency_code":"USD","in_stock":true},{"title":"Stainless Steel","offer_id":41013181808726,"sku":"500.110","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/both-Guillotine-Clamps_5860aea2-095f-4837-af3c-bc926761bbaf.jpg?v=1713397407"},{"product_id":"upgrade-services-for-saws","title":"Lever Tension Upgrade Service for Saws","description":"\t\t\t\t\t\t\t\t\t\t\n\u003cp class=\"text\"\u003eSend us your saw, we’ll upgrade it with a lever tension system and send it back. We have the gear to get it done right and quick.\u003c\/p\u003e\n\n\u003cp class=\"KCred strong\" style=\"margin-bottom: .6em\"\u003e\u003ci class=\"fa fa-exclamation-triangle\"\u003e\u003c\/i\u003e READ THIS BEFORE PURCHASING.\u003c\/p\u003e\n\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list\"\u003eTo purchase an upgrade service, you will have to send your saw to us. You will be charged shipping at checkout. That’s to pay for the shipping of the saw when we return it to you.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePackage your saw well and to assure that your order is error free.\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePrint out a copy of your order confirmation receipt and send it to us with your saw. (The receipt will arrive by email after your purchase is completed.)\u003c\/li\u003e\n\u003cli class=\"text bullet-list\"\u003ePlease read the lever tension descriptions carefully to determine which kit will work for your saw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"rounded_border\"\u003e\n\u003cp class=\"text strong\" style=\"margin-bottom: 6px;\"\u003eIf you live within the U.S., ship your saw to:\u003c\/p\u003e\n\u003cp class=\"text\"\u003eKnew Concepts\n\u003cbr\u003eATTN: Upgrades\n\u003cbr\u003ePO Box 1087\n\u003cbr\u003eWatsonville, CA 95077\u003c\/p\u003e\n\n\u003cp class=\"text strong\" style=\"margin-bottom: 6px;\"\u003eIf you live outside the U.S.\n\u003c\/p\u003e\n\u003cp class=\"text\"\u003e\u003ca href=\"https:\/\/knewconcepts.com\/contact\/\" target=\"blank\" title=\"Contact Us\" class=\"hyperlink\"\u003eContact us first.\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\n\u003cp class=\"text KCred\"\u003eFactory item only, not available from distributors.\u003c\/p\u003e\n\t\t\t","brand":"Knew Concepts","offers":[{"title":"Lever Tension Upgrade for Newer (Post-2010) Saws","offer_id":41022261166166,"sku":"125.010","price":35.0,"currency_code":"USD","in_stock":true},{"title":"Lever Tension Upgrade for Original (Pre-2010) Saw","offer_id":41022261133398,"sku":"125.009","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Upgrade-Services_b8a80a8c-a2af-4d0d-a3c1-a0461caa9df8.jpg?v=1713396636"},{"product_id":"flex-mount-face-sheilds","title":"Flex Mount Face Shields","description":"\u003ch5 style=\"margin-top: 20px;\"\u003eThree Choices of Flex-Mount Face Shields\u003c\/h5\u003e\n\u003cul class=\"bullet-list\"\u003e\n\u003cli class=\"text bullet-list strong\"\u003eOriginal Flex-Mount Face Shield\u003c\/li\u003e\n  \u003cli class=\"text bullet-list strong\"\u003eFlex-Mount Face Shield with LED Lights\u003c\/li\u003e\n\u003cli class=\"text bullet-list strong\"\u003eFlex-Mount Face Shield with LED Lights and 2X Magnified Lens\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch5 style=\"margin-bottom: 6px;\"\u003eOriginal Flex-Mount Face Shield\u003c\/h5\u003e\n\u003cp class=\"text\"\u003eOur American made Flex-Mount Face Shield is a 6\" X 8\" sheet of polycarbonate on a flexible arm, designed to mount onto our \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/dovetail-accessory-plate\" title=\"Dovetail Accessory Plate\" class=\"hyperlink\"\u003eDovetail Accessory Plate.\u003c\/a\u003e Use them to keep grinding\/polishing dust out of your eyes and nose when using a flex shaft or work held in the dovetail system tools, like the GRS Benchmate, or the our \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/bench-pin\" title=\"Stainless Steel Bench Pin\" class=\"hyperlink\"\u003eStainless Steel Bench Pin.\u003c\/a\u003e Adjust the shield to help keep the dust out of your face. Great for environments that require eye protection.\u003c\/p\u003e\n\n\n\n\u003ch5 style=\"margin-bottom: 6px;\"\u003eFlex-Mount Face Shield’s with LED Lights\u003c\/h5\u003e\n\n\u003cp class=\"text\"\u003eOur American made Flex-Mount Face Shield’s with LED Lights are designed to mount onto our \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/dovetail-accessory-plate\" title=\"Dovetail Accessory Plate\" class=\"hyperlink\"\u003eDovetail Accessory Plate\u003c\/a\u003e. The LED face shield protects your face from flying crud, while giving you bright, warm white, shadowless light, close up to your work, regardless of if you’re using our \u003ca href=\"https:\/\/knewconcepts.myshopify.com\/products\/bench-pin\" title=\"Stainless Steel Bench Pin\" class=\"hyperlink\"\u003eStainless Steel Bench Pin\u003c\/a\u003e, a GRS Benchmate, Wax Lathe, or any one of the other great tools that mount onto a standard dovetail plate.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eThe 6\" x 8\" polycarbonate face shield has 18 high intensity LED lights in two fully diffused banks for bright, clear light, without shadows, right where you need it, without sacrificing valuable bench space, or interfering with your tools. Rather than requiring you to use one bench pin, one way, this flexible shield lets you use any dovetail tool you want, any way you want.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eThe electrical cable is designed with a quick disconnect near the mounting point, so that you can run the cable once, then connect it easily whenever you need it, and disconnect it cleanly when you don’t.\u003c\/p\u003e\n\n\u003cp class=\"text strong\" style=\"margin-bottom:6px;\"\u003eWith 2X Magnified Lens\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eOur face shield with magnifying lens has a 2\" x 4\", 2X magnifying lens made in the US by Donegan Optical: the same people who make the original Optivisor—the standard by which the copies are judged. The lens has a 10\" focal distance, so you can get a closer view of whatever you’re working on without needing to climb right in on it. The four inch width of the lens lets you use both eyes, so you keep both your distance and your depth perception.\u003c\/p\u003e\n\n\n\n\u003cp class=\"text\"\u003eExcept for the polycarbonate shield itself, the lens, and the flexible neck, all of the structural components are machined from solid aluminum for maximum durability, right here in Santa Cruz.\u003c\/p\u003e\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\n\u003ciframe width=\"100%\" height=\"315\" style=\"margin-top: 20px;\" src=\"https:\/\/www.youtube.com\/embed\/s3yTsDA3pmg?si=q5VCla0kmYuBiCuw\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e","brand":"Knew Concepts","offers":[{"title":"Original Flex-Mount Face Shield","offer_id":41022857281622,"sku":"350.215","price":65.0,"currency_code":"USD","in_stock":true},{"title":"Flex-Mount Face Shield with LED Lights","offer_id":41113013256278,"sku":"350.220","price":168.0,"currency_code":"USD","in_stock":true},{"title":"Flex-Mount Face Shield with LED Lights and 2X Magnified Lens","offer_id":41022857314390,"sku":"350.225","price":195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Original-Flex-Mount-Face-Shield.jpg?v=1713397616"},{"product_id":"eid-longhi-anticlastic-stakes","title":"Eid-Longhi Anticlastic Stakes","description":"\u003cp class=\"text\"\u003eDesigned by Cynthia Eid and Betty-Helen Longhi, noted metalsmiths and innovators. The American made Eid-Longhi “Can’t Twist” anticlastic stakes incorporate simple features that make them more effective for forming metal, especially anticlastic curves, making them your best choice for creating intricately curving forms. Each stake is manufactured from a single piece of Delrin®, which will not mar your metal yet stands up easily to the rigors of forming metal.\u003c\/p\u003e\n\n\u003cp class=\"product\" style=\"margin-top:20px;\"\u003e\u003ciframe width=\"100%\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/Yhv2PECwIyM?si=SPhMt4BjLSQhgi7Q\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003cp class=\"text\" style=\"margin-top:20px;\"\u003eMade to be secured in a bench vise, the stakes have a pair of steel pins on each side that center and level the stake on the upper jaw surface of your vise. Two threaded screws with washers and wing nuts extend down through the jaw to secure the stake vertically in the closed jaws, ensuring a stable, unmoving work surface. These threaded screws can be inserted into either the upper or lower edge of the stake, allowing access to cavities on either edge of the stake and vastly increasing the versatility of the stake.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eEach stake offers cavities of varying widths and depths.\u003c\/p\u003e\n\n\u003cp class=\"text\"\u003eCynthia and Betty-Helen also wrote an outstanding book titled \u003ca href=\"https:\/\/www.brynmorgen.com\/#\/creative-metal-forming\/\" title=\"Creative Metal Forming\" target=\"blank\" class=\"hyperlink\"\u003eCreative Metal Forming\u003c\/a\u003e on the process of shellforming metal. If you want to understand why these stakes work so much better, their book is a great place to start.\u003c\/p\u003e\n\n","brand":"Knew Concepts","offers":[{"title":"3\/8-inch Mini","offer_id":41066687889494,"sku":"100.375","price":60.0,"currency_code":"USD","in_stock":true},{"title":"5\/8-inch Small","offer_id":41066725670998,"sku":"100.625","price":85.0,"currency_code":"USD","in_stock":true},{"title":"1-inch Medium","offer_id":41066725703766,"sku":"100.100","price":95.0,"currency_code":"USD","in_stock":true},{"title":"1.5-inch Large","offer_id":41066725736534,"sku":"100.150","price":125.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Anticlastic-Stake-3.8-inch-mini_fcb9e0ef-c5a6-4e57-84d9-e49bd3f3923f.jpg?v=1713395797"},{"product_id":"super-q-blade-lubricant","title":"Super-Q Blade Lubricant","description":"\u003cp class=\"text\"\u003eSuper-Q blade lubricant is helps extend blade life when cutting metal, and helps make cutting easier by lubricating the blade while you cut.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eTo use it, just cut a couple of strokes to warm up your blade, and then stop and slide the bar down the blade once to coat it. Then get back to cutting, and enjoy how much smoother the cut is.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e\u003cstrong\u003eFor Woodworkers:\u003c\/strong\u003e Blade lubricants are intended for metal, but for wood, they might be helpful when doing detailed cuts in very hard woods, like rock maple. Be aware that most lubricants are waxes, and might penetrate the wood slightly. That may or may not matter in every case, but it is important to know.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":41526665281622,"sku":"218.104","price":7.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/SuperQlube-webcopy.jpg?v=1719348459"},{"product_id":"super-q-blade-variety-pack","title":"Super-Q Jeweler's sawblade variety pack","description":"\u003cp class=\"text\"\u003eVariety pack of German Super-Q jeweler's blades for metal.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e1 dozen each of seven sizes: numbers 5, 3, 1, 2\/0, 3\/0, 4\/0, \u0026amp; 6\/0.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eYou save $10 over buying 7 packs of blades individually.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eSuper-Q blades are manufactured in Germany, and are among the finest blades available today. With updated tooth geometry, and rounded backs to make the tightest turns easy.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThis variety pack lets you experiment to see what size works best for you, or keep different sized blades on hand for different projects.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":41526854549590,"sku":"218.100","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/SuperQsixpack-webcopy.jpg?v=1719350677"},{"product_id":"woodworking-fretsaw-blade-variety-pack","title":"Woodworking fretsaw blade variety pack","description":"\u003cp class=\"text\"\u003eVariety pack of woodworking fretsaw blades.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThere are 7 different kinds of blade in this pack: FIX, SPEED, ULTRA, PEBECO, PENGUIN SILVER, PENGUIN GOLD and PENGUIN GOLD NEW SPIRAL - 6 blades each in size 5\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThe \"FIX\" blades are skip-toothed, with wide gullets to help clear sawdust from thicker material. They also have set teeth, which is unusual in small blades like this.\u003cbr\u003eThe \"Speed\" blades have even wider gullets, for even more clearance, but are best for thicker stock. They also have a few reversed teeth at the end to reduce tearout, but no set.\u003cbr\u003eThe \"Ultra\" blades have a 3 tooth reverse pattern, so every third tooth is reversed, with a thinner blade. No set.\u003cbr\u003eThe \"Pebeco\" blades have wide gullets, but not as wide as the fix or speeds. So they clear sawdust well, and are better for thinner stock. No set.\u003cbr\u003eThe \"Penguin Silver\" blades have a 'two teeth then a gap' pattern for good sawdust clearance, and better results on intermediate thickness stock. They also have set teeth.\u003cbr\u003eThe \"Penguin Gold\" \u0026amp; \"Penguin Gold-New Spiral\" are spiral toothed blades, which will cut in all directions, while leaving a wider kerf. The 'New Spirals' have a slightly tighter spiral, and are better for thinner stock.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThis variety pack lets you experiment to see what kind works best for you, or keep different sized blades on hand for different projects.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":41526988636246,"sku":"218.204","price":20.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/Woodworkingkitcopy.jpg?v=1719356560"},{"product_id":"5x12-woodworking-sawblade-variety-pack-copy","title":"Fix Yellow Woodworking sawblade variety pack","description":"\u003cp class=\"text\"\u003eVariety pack of German Fix Yellow fret saw blades for wood.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e1 dozen each of five sizes: numbers 1, 3, 5, 7, \u0026amp; 9.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eYou save $5 over the cost of all 5 packs separately.\u003c\/p\u003e\n\u003cp class=\"text\"\u003eFix-Yellow blades are manufactured in Germany, and are among the finest blades available today. The Fix line is available in two types, yellow and blue.  The difference is the yellows are harder than the blues.  Which means the yellows cut a little better in harder woods.\u003c\/p\u003e\n\u003cp class=\"text\"\u003e  The important part about either flavor of the Fix blades is that they have wide gullets (almost skip-toothed) for easy sawdust clearance in thicker stock, and crucially, their teeth are set, which is unusual in blades this small.  Set teeth cut a slightly wider kerf, but make turns \u003cem\u003emuch\u003c\/em\u003e easier.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"text\"\u003eThis variety pack lets you experiment to see what size works best for you, or keep different sized blades on hand for different projects.\u003c\/p\u003e","brand":"Knew Concepts","offers":[{"title":"Default Title","offer_id":41527583342678,"sku":"218.200","price":26.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1811\/2583\/files\/5x12woodkit.jpg?v=1719375434"}],"url":"https:\/\/knewconcepts.shop\/collections\/all.oembed?page=2","provider":"Knew Concepts","version":"1.0","type":"link"}