Sold in Packages of 12
Herkules White Label Jeweler’s saw blades are among the finest on Earth. Made in Germany, they are specifically intended for cutting harder metals, like die steel for blanking dies. Which means they last noticeably longer in softer metals like silver and gold. They are also the only line of saw blades that goes all the way down to 10/0.
These are 130mm (5.125") jeweler’s blades. They fit all of our saws except the coping saw.
For the Jewelers: these are the blades you want.
For the Woodworkers: these probably are not the blades you want. They’re intended for cutting thin metal. They’ll cut wood, but very, very slowly. They’re also incredibly thin by woodworking standards, and thus easy to break. The 10/0 blades are a smidge thicker than a human hair. With teeth.
Sizing Information for Jeweler’s Saw Blades
|
Name
|
Width (mm/inch)
|
Height (mm/inch)
|
TP CM
|
TPI
|
|
Herkules #9
|
0.55mm/0.0217"
|
1.20mm/0.0472"
|
10
|
25.4
|
|
Herkules #8
|
0.50mm/0.0197"
|
1.12mm/0.0441"
|
11
|
27.9
|
|
Herkules #7
|
0.48mm/0.0189"
|
1.02mm/0.0402"
|
12
|
30.5
|
|
Herkules #6
|
0.44 mm/0.0173"
|
0.95 mm/0.0374"
|
13
|
33.0
|
|
Herkules #5
|
0.40 mm / 0.0157"
|
0.85 mm / 0.0335"
|
14
|
35.6
|
|
Herkules #4
|
0.38 mm / 0.015"
|
0.80 mm / 0.0315"
|
15
|
38.1
|
|
Herkules #3
|
0.36 mm / 0.0142"
|
0.75 mm / 0.0295"
|
16
|
40.6
|
|
Herkules #2
|
0.34 mm / 0.0134"
|
0.70 mm / 0.0276"
|
17
|
43.2
|
|
Herkules #1
|
0.30 mm / 0.0118"
|
0.60 mm / 0.0236"
|
18
|
45.7
|
|
Herkules #0
|
0.28 mm / 0.011"
|
0.56 mm / 0.0220″
|
20
|
50.8
|
|
Herkules #2/0
|
0.26 mm / 0.0102"
|
0.52 mm / 0.0205″
|
22
|
55.9
|
|
Herkules #3/0
|
0.24 mm / 0.0094"
|
0.48 mm / 0.0189"
|
24
|
61.0
|
|
Herkules #4/0
|
0.22 mm / 0.0087"
|
0.44 mm / 0.0173"
|
26
|
66.0
|
|
Herkules #5/0
|
0.20 mm / 0.0079"
|
0.40 mm / 0.0157"
|
28
|
71.1
|
|
Herkules #6/0
|
0.18 mm / 0.0071"
|
0.36 mm / 0.0142"
|
32
|
81.3
|
|
Herkules #8/0
|
0.16 mm / 0.0063"
|
0.32 mm / 0.0126"
|
35
|
88.9
|
|
Herkules #10/0
|
0.14 mm / 0.0055"
|
0.30 mm / 0.0118"
|
36
|
91.4
|
Download Jeweler’s Saw Blade Sizing Charts. There are two charts: U.S. inch and metric. Pick whichever you prefer. The small charts only go from 10 to 10/0, while the fullsize chart starts at size 16, and goes down to 10/0. These charts are intended to give you information that will help you pick the right blade for your project.
This chart information is for jeweler’s saw blades, which are intended for metal. (Woodworking blades are the same length, but have coarser teeth. )
This information for jeweler’s blades is based on data provided by the manufacturer specifically for the Herkules White Label blades that we carry. Other manufacturer’s blades should be close to the same measurements, but they may not be exactly the same.
